MAGNUS DRY SUMPS OIL SYSTEM
Magnus Dry Sumps continue to be sought after in every genre of Motorsports, including Performance Street, Drag Racing, Time Attack, Formula Drift and Rally cars.
Here at Magnus, we have been at the forefront of building race engines for the past two decades. When we say that we have done it all, we mean it, we have been through it all. Fortunately for the automotive enthusiast’s research and development being done by parts manufactures has been moving at such an unbelievable pace for the past decade and as engine and tire technology begin to reach new heights, the amount of G-force an engine experiences have increased dramatically. It has increased to the point where limitations to the factory engineered oil systems are being reached – a Dry Sump system has become a necessity.
High RPM launch control, Cornering, Launching, Braking, any one of these will upset the oil level in your car. In drag racing what we experience is 2 step launch control for 2 – 4 seconds (depleting the pan of oil) a multiple G-force launch, moving the oil to the back of the pan. High rpm runs in the 8500 – 11,000 RPM range, further deplete the pan of oil. Compound this with trying to drain back to the engine’s case while excess pressure from the rings try to push its way up to the valve cover.
Now, hit the brakes or pull the parachute! What little oil is left is pushed to the front of the motor. You can see why we resorted to overfilling our engines and immediately shutting them down after crossing the line. In road race applications it has helped tremendously in keeping oil pressure to the motor. Downhill sweepers where the OEM pump would have the problem of running dry. Overfilling the engines just would end up filling our breather tanks, causing other problems. All these problems together can cause the oil level in the pan to run below the oil pickup, causing the pump to run dry and destroy your engine, oil pump, or turbo.
MAGNUS DRY SUMP BREATHER CANS
Our breather cans significantly reduce positive pressure build up in the crank case, allowing your pistons to achieve higher RPM’s easier. Tanks include 3” filter and drain plug pre-installed, internal baffle, bolt in mounting bracket, -16AN female fittings that are meticulously Tig welded and hand spun from premium high strength, lightweight aluminum. Overall dimensions are 12″ x 3″ (including filter).
Consider Magnus anodized fittings for the best results – made in house at Magnus.
MAGNUS DRY SUMP GEARS AND DRIVES
Magnus Cam Gear HTD Drive Center MMCENG1018: Magnus Drive gear uses a HTD timing belt tooth profile to accommodate higher torque loads and is now integrated into the cam gear center section. Can also be used to drive other external components if necessary from the cam. Cam gears are universal and will fit Evo or DSM.
Magnus dry sump OIL PUMP PULLEYS are designed to give you optional shaft sizes (.500” and .625”), key gears sizes (.125” and .187”) ratios for your dry sump system to achieve that desired drive ratio. They are made from billet aluminum and feature a hard coat anodized finish for durability. Pulleys are available with several different tooth counts (32, 34, 36) to achieve the ratio that you need.
Magnus 14 Tooth Gilmer Gear MMCENG2150 : 1″ Bore .125″ Key, L-Series or HTD Profile
MAGNUS DRY SUMP BILLET OIL PANS
All Magnus Oil Pans are machined from Billet 6061 Aluminum, increase strength, lower center of gravity and reduce vibration. The design of the oil pan includes a low profile and internal baffles. Our 5 Axis CNC ensures industry leading precision and perfect seals.
VR38 GTR RWD (MMCENG5051) : Dry sump pan is can be used alone or in conjunction with our RWD conversion kit, For clutch cars, TH400 equipped, anything but the factory trans. Designed to be able to remove the 4WD lower pan of the VR38 and lower the engine up to 5 inches. Lower crankshaft center line brings the VR38 engine to a more usable 8 – 9 inch crankshaft center line. Perfect for RWD tube Chassis cars, Street rods, Drift builds, Sports cars, and carbon monocoque vehicles that utilize the engine as a stressed member. 5 stage Peterson R4 Dry sump mounts are optional. Uses Factory GTR starter, factory GTR crank sensor, can be teamed with our billet flywheel and bell housing for 1 completely engineered combination. Will not work with factory oil pump, for use with Magnus Dry Sump components only.
2JZ-GE and 2JZ-GTE (MMCENG7000-005) : Magnus Motorsports Low Profile Billet Aluminum, one piece Dry Sump Oil Pan. Milled from 6061 Billet Aluminum, the rail thickness and added support structure promotes rigidity and durability, the total weight is 7.2 lbs. For use with 4 or 5 stage oil pump and a perfect match for the Magnus 2JZ Front Cover.
Subaru EJ20 / EJ25 (MMCENG2100-002) : Sump Pan with Integrated Mount is necessary for rally and high-performance applications. Our 100 percent billet dry sump pan is designed to mount our Dry sump pump directly to the pan. It also has a depression built in to allow Mounting of the Magnus MF fuel pump to the back of the Dry sump pump for those seeking tighter packaging.
4G63 (1G/2G/EVO) and RWD : The new updated version of our Dry sump pan features a 2-piece bolt together design which allows for disassembly and easy motor inspection. The sump portion of the pan can be configured to your specifications. This pan can be configured in RWD format or conventional transverse format. The Magnus dry sump oil pan will not work without the use of our Magnus 4G63 Billet front cover.
Honda K-Series RWD (MMCENG2200-001) : The Magnus K-Series K20, K24 RWD Dry sump is specifically made to work with our K series Billet block, but can also work on others. Features factory mounting locations and is adaptable to our R4 3 or 4 stage dry sump pumps. Adaptors and drives are also available to make this work in your RWD swap car.
MAGNUS PUMP MOUNTS AND OIL FILTER RELOCATORS
When altering your drive train, Magnus provides universal mounts to make the process more efficient. Popular conversions include FWD to RWD (K-Series Hondas), AWD to RWD (VR38 GTR). These billet mounts give you options like mounting, high or low on 4G63’s, or left and right on the Nissan R35 G-TR.
MAGNUS OIL TANKS
9 Litre / 2.3 Gallon External Dry Sump Oil Tank MMCENG2500 :
Magnus Hand Fabricated 7″ diameter 9Litre/2.3 Gallon universal tanks are designed for use in all engine applications.
Hand spun aluminum tanks are Precision tig welded on O ringed flanges which assemble at 30-degree angle to the flange surface allowing easy disassembly and assembly with simple hand tools. Internally baffled to aid in de-aeration of oil. -16 ORB fittings all around for large volume and flow. Will support 5 stages of scavenge venting and 30 gallon per minute oil pumps.
Brackets are included with all tanks, for secured mounting. Both top and bottom brackets have lightweight aluminum bases, stainless steel straps and sturdy rubber padding for added protection.
GT-R R35 MMCENG5000-201 : 9 Liter / 2.3 Gallon capacity DBA Dry Sump Tank (2012 – up)
Designed to fit behind the headlights of all 2012 and up GTR R35 with ample clearance.
For secured mounting, included in the kit are, top and bottom stainless-steel brackets in addition to the tank mount that features a lightweight aluminum base and stainless-steel straps with sturdy rubber padding for added protection.
7″ diameter 9Litre/2.3Gallon Tanks are designed for all types of racing. Fitted with a dipstick tube for GTR for measuring oil level. Featuring -16 ORB fittings all around for large volume and flow, hand spun aluminum tanks are internally baffled and vented and come apart easily for easy cleaning. O – ringed flanges with 5 axis machined Flanges put the assembly screws on a 30-degree angle to the flange surface allowing easy disassembly and assembly with simple hand tools.
DRY SUMP OIL PUMPS BY PETERSON
Our Dry Sump Kits feature the Peterson Fluid Systems Oil Pump. The pumps utilize a revolutionary twisted lobe rotor design with all aluminum rotors in all sections saving a huge amount of weight while also increasing performance. The internal scavenge manifold and shallow depth screw in fittings make for a low profile which equates to easy mounting. Finally, the pumps are modular, enabling 3 to 6 stages. Note: Stages refer to total number of pumping bodies which include (1) pressure section. i.e., a 4 stage pump includes (1) pressure section and (3) scavenge sections.
Magnus fittings are made in house from 6061 aluminum and are anodized (in black) to provide scratch resistance. Their performance has been stress tested on track cars around the world and proven on World Record holders. They can be used for oil, gas, nitrous and to extreme temperatures. See our line of fittings that cover -AN, ORB, Plugs, Step Up and Step Down and “Y” fittings.
Aluminum Weld On Bungs Variants: Male: -8 Orb, -10 Orb, -12 Orb and Female: -20 Orb
DRY SUMP FEATURES
- Increased oil capacity (thanks to the remote reservoir) which allows the oil to cool and release entrained gasses from ring blow by and the action of the crankshaft
- Capability to mount the engine lower in the car. Goal: lower the center of gravity
- The external reservoir can be relocated to improve weight distribution
- Prevent oil starvation like seen in wet sump systems
- External oil pump allows for quick maintenance or replacement
- More horsepower
- Increased reliability
- The most consistent oil pressure is possible
- Reduced parasitic power loss